Configuring Wireless Wan Mobile Broadband Router; Installation Considerations; Installation Instructions- Get Start Networking - NetComm N3G007W User Manual

3g wireless router

Hide thumbs Also See for N3G007W:

Table of Contents

2. Configuring Wireless WAN Mobile broadband Router

The Wireless WAN Mobile Broadband Router allows you access your network using a

wireless connection, from virtually anywhere within its operating range. Keep in mind

however, that the number, thickness, and location of walls, ceilings, or other objects that the

wireless signals must pass through, may limit this range.

Typical ranges vary depending on the types of materials used, and background RF (radio

frequency) noise in your home or business.

To maximize your wireless range, please follow these guidelines:

1. Keep the number of walls and ceilings between the Wireless WAN Mobile Broadband

Router and other network devices to a minimum. Each wall or ceiling can reduce the

Wireless WAN Mobile Broadband Router's range from 3-90 feet (1-30 meters).

The same considerations apply to your broadband EVDO connection.

Note:

2. Keep your product aware from electrical devices (such as microwaves, air conditioners,

and televisions) that emit large quantities of RFI (Radio Frequency Interference).

Connect the Wireless Router to Your Network

DO NOT connect Wireless WAN Mobile Broadband Router to power before

Note:

performing the installation steps below.

1. Attach the antenna.---picture 2.1

a. Remove the antenna from its plastic wrapper.

b. Screw the antenna in a clockwise direction to the back panel of the unit.

c. Once secured, position the antenna upward at its connecting joint. This will

ensure optimal reception.

Picture 2.1

Table of Contents