Table of Contents
Advertisement
If enabled, the total print count appears on both the Online and Offline screens.
The number in the brackets to the right of [QTY] on the Online and Offline screens is the total print
count.
•
Shows the total print count from the time the printer is on until it is off.
When you power off the printer, the count is reset to [0].
[Password]
The setting items are as follows:
[Password Enable]
Enable or disable the password setting.
If you have enabled the password, the printer requires you to enter the password set in the [Password]
menu before you enter the Settings mode.
•
The default password is 0310. You can change the password in [Password] > [Change
Password] > [level1].
[Password Required After]
Set the period of time until password is required to enter the Settings mode again after once logging
in.
If you set to 0, a password is required every time you log in.
The setting range is from 0 to 99 minutes.
[Install Security]
Enable or disable the password input for installing the pkg file to the printer.
If you have enabled the password input, the printer requires you to enter the password set in the
[Password] menu before you can download the package file.
The options are as follows:
None
No password is required to install a pkg file.
USB
Password is required to install a pkg file from the USB memory.
Always
Password is required to install a pkg file from the USB memory or downloaded from computer.
•
The password used for installing a pkg file can be any passwords set in the [System] >
[Password].
Contact your SATO reseller or technical support center for more information of the pkg
file.
289
Advertisement
Table of Contents
