Loading The Media Roll (Printing In Linerless Tearoff Mode) - SATO FX3-LX Operator's Manual

Hide thumbs Also See for FX3-LX:

Table of Contents

7. Tap [FEED].

The media is fed to the print start position.

Loading the Media Roll (Printing in Linerless Tearoff Mode)

The print head and its surroundings are hot after printing. Be careful not to touch it, to

avoid being burned. Do not replace the media immediately after printing.

Touching the edge of the print head with your bare hand could cause injury.

When printing in linerless tearoff mode, install the optional linerless kit.

Loading the Media Roll (Printing in Linerless Tearoff Mode)