Cleaning Using The Cleaning Kit (With Optional Linerless Kit) - SATO FX3-LX Operator's Manual

Hide thumbs Also See for FX3-LX:

Table of Contents

8. Clean the dirt off of the three rollers (10) using a cotton cloth dabbed with cleaning

9. Reload the media if you removed it in step 3.

10. Close the dispenser frame.

Cleaning Using the Cleaning Kit (with Optional Linerless Kit)

The cleaning procedure using the cleaning kit is as follows:

Never use organic solvents, such as thinner and benzine to clean the printer.

For details on the cleaning kit, refer to the manual attached to the cleaning kit.

1. Make sure that the printer is powered off, and disconnect the power cord from the

AC outlet or remove the optional battery.

2. Press the cover open button (1) to open the top cover (2).

3. Remove the media if it is already loaded.

Cleaning Using the Cleaning Kit (with Optional Linerless Kit)