SATO FX3-LX Operator's Manual page 133

Hide thumbs Also See for FX3-LX:

Table of Contents

[Center I-Mark]

Select when the I-mark is positioned at the center.

The I-mark position is determined by the label size.

(1) Media feed direction

[Bottom I-Mark]

Select when the I-mark is positioned at the bottom.

(1) Media feed direction

[Top I-Mark]

Select when the I-mark is positioned at the top.

(1) Media feed direction

[Custom I-Mark]

Custom I-mark allows using labels where the I-mark position does not correspond with [Center I-

Mark], [Bottom I-Mark] and [Top I-Mark]. With the [I-Mark Offset] setting, you can set the position