SATO FX3-LX Operator's Manual page 260

Hide thumbs Also See for FX3-LX:

Table of Contents

Specify the offset position of the QR code in the horizontal direction.

Set the correction value from the standard printing position when facing the printer as "-" to adjust

to the right side and "+" to adjust to the left side.

(1) Feed direction

The setting range is from -792 to +792 dots.

The length of 1 dot is 0.083 mm (0.0033").

You can change the unit to dots or inches in the [System] > [Regional] > [Unit] menu.

[SOS Update] (SOS users only)

Shows the current printer information with a QR code. Scan the QR code with a tablet or smartphone,

and send it to the SOS cloud.

Appears only if you have selected [On-Demand] in the [SOS Mode] menu.

A specialized application is required to scan the QR code.

If you have selected [Print] in the [Update Screen], tap [PRINT] to print the QR code.

To print the QR code, use media of more than 40 mm (1.57") in length and more than 40 mm (1.57") in

width (not including the liner).

Set the advanced function for the interface.

The setting item is as follows:

[ARP Announcement]

Set the functions for ARP announcement.

The ARP announcement is useful for updating other hosts mapping of a hardware address when the

IP address or MAC address of the sender has changed.