Table of Contents
Advertisement
The setting range is from 1 to 4.
•
Depending on the product, the range of the key index may be 0 to 3. In such a case, if
you have set the printer to 1, set the product to 0.
[Key #1] to [Key #4]
Set the WEP key #1 - key #4.
You can enter alphabet (capital and small letters) and numbers.
Depending on the length of the WEP key, the number of characters you can set is as follows:
•
When the key length is 64 bits
ASCII: Five characters
Hexadecimal: 10 characters
•
When the key length is 128 bits
ASCII: Thirteen characters
Hexadecimal: 26 characters
[WPA Conf.]
Set the WPA authentication.
Appears only if you have selected [WPA2+WPA] or [WPA2] in the [Security] menu.
The setting items are as follows:
[WPA Authentication]
Set the WPA authentication method.
The options are as follows:
•
[Personal (PSK)]
•
[Enterprise (802.1x)]
•
[CCKM]
[PSK]
Set the PSK shared key.
Appears only if you have selected [Personal (PSK)] in the [WPA Authentication] menu.
You can enter 8 to 63 ASCll characters or 64 hexadecimal digits. Alphabets, numbers and symbols
can be used.
[EAP Conf.]
Set the functions for EAP.
Appears only if you have selected items other than [Personal (PSK)] in the [WPA Authentication] menu
or if you have selected [Dynamic WEP] in the [Wi-Fi Connection Setting] > [Security] menu.
The setting items are as follows:
[EAP Mode]
Set the EAP Mode (authentication mode).
The options are as follows:
330
[Wi-Fi Setting]
Advertisement
Table of Contents
