Table of Contents
Advertisement
•
Do not touch the charging terminal with wet hands.
•
If the charging terminal is dirty, clean the dirt using a dry cloth or a cotton swab.
•
Do not remove the terminal protection seal on the bottom of the printer if you will not be
using the optional battery mount kit or cradle kit.
2. Attach the concave parts on the bottom of the printer to the protruding parts of the
cradle kit (3).
3. Gently move the front side of the printer downwards to place it on the cradle kit.
When the printer is placed properly, it is locked in place with a click.
108
Using the Optional Cradle Kit
Advertisement
Table of Contents
