Table of Contents
Advertisement
•
The length of 1 dot is 0.083 mm (0.0033").
•
You can change the unit to dots or inches in the [System] > [Regional] > [Unit] menu.
[Top]
Set the top offset position of the label.
The setting range is from -120 to +120 dots.
•
The length of 1 dot is 0.083 mm (0.0033").
•
You can change the unit to dots or inches in the [System] > [Regional] > [Unit] menu.
[Caret]
Set the caret (^) code.
The setting range is from 0 to 255.
•
Each code (Caret, Delimiter and Tilde) must be set to different values.
[Delimiter]
Set the delimiter (,) code.
The setting range is from 0 to 255.
•
Each code (Caret, Delimiter and Tilde) must be set to different values.
[Tilde]
Set the tilde (~) code.
The setting range is from 0 to 255.
•
Each code (Caret, Delimiter and Tilde) must be set to different values.
[Clock Format]
Set the date format.
The options are as follows:
•
[(none)]
•
[MM/DD/YY (24-hour clock)]
•
[MM/DD/YY (12-hour clock)]
•
[DD/MM/YY (24-hour clock)]
•
[DD/MM/YY (12-hour clock)]
269
Advertisement
Table of Contents
