SATO FX3-LX Operator's Manual page 13

Hide thumbs Also See for FX3-LX:
Table of Contents

Advertisement

Using the head
cleaning fluid
Laser beam
Print head
Regarding the cutter
Handling the AC
Adapter
Battery Pack
Use of flame or heat around the head cleaning fluid is prohibited.
Absolutely do not heat it or subject it to flames.
Keep the fluid out of reach of children to prevent them from
accidentally drinking it. If a child accidentally drinks the fluid,
immediately consult with a physician.
Do not look into the laser radiation window, and do not direct the
laser beam at someone. If the laser beam hits eyes, it may cause
visual disturbance.
The print head is hot after printing. Be careful not to get burned when
replacing media or cleaning immediately after printing.
Touching the edge of the print head with bare hands could result in
injury. Be careful not to become injured when replacing media or
cleaning.
Do not touch the cutter with your hands or do not put something into
the cutter. Doing so could result in an injury.
Do not damage, break, or change the AC adapter. If you place a
heavy object on the AC adapter or heat, bend too much, twist, or pull
the AC adapter, the AC adapter may be damaged, which may cause
fire or electric shock.
If the AC adapter is damaged (the wires exposed or broken), contact
your SATO reseller or technical support center. If you operate the
product in this condition, it may cause fire or electric shock.
Never try to take apart the battery pack or modify it in any way such
as with a solder iron.
When charging the battery pack, make sure to use the product or the
specified battery charger.
Do not allow the battery to get wet with water or any liquid.
Do not throw or drop the battery, subjecting it to strong impacts or
shocks. Also, never use a damaged or deformed battery. Doing so
may lead to abnormal overheating or fire.
Do not rub your eyes if the battery liquid leaks and comes into
contact with your eyes. Rinse well with clean water such as tap
water, and seek medical attention immediately.
If charging is not completed after the specified time elapses, stop
charging immediately.
13

Advertisement

Table of Contents
loading

Table of Contents