SATO FX3-LX Operator's Manual page 298

Hide thumbs Also See for FX3-LX:

Table of Contents

If you enable [Hex Dump Mode], the design of the Online/Offline screen changes.

You can save a maximum of 10 received data files for each type of interface.

Depending on the file size, the number of files you can save will be less than 10.

The details of the files created inside "hexdump/" of the printer are as follows:

Received data through Bluetooth.

LAN00xx.bin (USB+LAN model only)

Received data through LAN.

Received data through NFC.

PIPE00xx.bin

Received data through pipe.

Received data through USB.

WIFI00xx.bin

Received data through wireless LAN.

[Buffer Dump]

Save the receive buffer data to the printer.

Available only if you disabled the [Hex Dump Mode] menu.

Tap [START] on the startup screen to save the data to the printer.

Save the receive buffer data to "buff/" in the printer.