Table of Contents
Advertisement
Powering On/Off the Printer
Connecting to Power
Connecting the AC Adapter and the Power Cord
•
Do not connect or disconnect the power cord while your hands are wet. Doing so could
cause an electric shock.
•
Make sure that the AC voltage of your region is in the range of AC 100 - 240 V, 50 -
60 Hz. If your local voltage is not in the stated range, contact your SATO reseller or
technical support center.
•
The attached power cord and AC adapter are designed exclusively for this printer. Do
not use them with other devices.
1. Connect the AC adapter and the power cord.
a. Connect the AC adapter (1) and the power cord (2) (
b. Insert the AC adapter plug (3) into the DC input connector at the rear of the printer (
c. Insert the power plug into an AC outlet (
Connecting the AC Adapter and the Power Cord
).
).
98
).
Advertisement
Table of Contents
