SATO FX3-LX Operator's Manual page 194

Hide thumbs Also See for FX3-LX:

Table of Contents

3. Load the media roll.

Set the media roll with the print side (5) facing the print head (6) and push it diagonally from the

If the media roll is loaded correctly, the indicator part (7) of the media guide that moved to side

returns to its original position.

There are two wind directions for the media. The illustration is for face-out media.

4. Pull out the media and pass it below the tabs (8).

Loading the Media Roll (Printing in Continuous Mode/Tear-Off Mode)