SATO FX3-LX Operator's Manual page 500

Hide thumbs Also See for FX3-LX:

Table of Contents

The height may be limited depending on where media is placed.

When drawing the media from under the desk, not from the position on the same desk

which the rear side of the printer is placed, place the media so as not to obstruct the

printing operation.

Fan-fold media is not available in dispenser mode since the perforated line affects the

dispenser function.

140 to 190 μm (0.14 to 0.19 mm (0.0055" to 0.0075"))

Usable Media