[Counter] (SOS users only)
You can select the counter for the print head, cutter, or both for the timing to perform the periodic
notification.
Appears only if you have selected [Counter] in the [Type] menu.
Advanced setting items appear on the [Periodic Notification] menu according to the selected options.
The options are as follows:
•
[Thermal Head]
•
[Cutter]
•
[Thermal Head+Cutter]
[Head] (SOS users only)
You can specify or check the print distance of the print head for the timing to perform the periodic
notification.
Appears only if you have selected [Thermal Head] or [Thermal Head+Cutter] for [Counter] in the [Type]
menu.
The setting items are as follows:
[Meters] (SOS users only)
Specifies the print distance of the print head for the timing to perform the periodic notification. You will
be notified for every meter you specify.
The setting range is from 1 to 100,000.
[Last Update] (SOS users only)
Shows the print distance of the print head for the last periodic notification.
[Next Update] (SOS users only)
Shows the print distance of the print head for the next periodic notification.
[Current Value] (SOS users only)
Shows the current print distance of the print head.
[Cutter] (SOS users only)
You can specify or check the number of cut times of the cutter for the timing to perform the periodic
notification.
Appears only if you have selected [Cutter] or [Thermal Head+Cutter] for [Counter] in the [Type] menu.
The setting items are as follows:
[Cuts] (SOS users only)
Specifies the number of cut times of the cutter for the timing to perform the periodic notification. You
will be notified for each number of cut times you specify.
The setting range is from 1 to 1,000,000.
[Last Update] (SOS users only)
Shows the number of cut times of the cutter for the last periodic notification.
257