SATO FX3-LX Operator's Manual page 192

Hide thumbs Also See for FX3-LX:

Table of Contents

4. Slide the flap upward when using the φ40 mm (φ1.5") core, or downward when

using the φ26 mm (φ1") core. Then insert the groove of the flap (5) into the

protrusion of the media guide (4).

When the left flap is set to the upper position, an indicator (6) pops out. Do not push

the indicator in.

5. Set the other side of the flap to the same position.

Changing the Flap Position of the Media Guide