Table of Contents
Advertisement
•
For details on the cleaning kit, refer to the manual attached to the cleaning kit.
1. Make sure that the printer is powered off, and disconnect the power cord from the
AC outlet or remove the optional battery.
2. Press the cover open button (1) to open the top cover (2).
3. Remove the media if it is already loaded.
4. Clean the dirt off of the print head (3) and two rollers (4) using a cotton swab
dabbed with cleaning liquid.
•
The print head and its surroundings are hot after printing. Wait until the printer cools
down.
•
Touching the edge of the print head with your bare hand could cause injury.
420
Cleaning Using the Cleaning Kit
Advertisement
Table of Contents
