•
When you enable the setting, be sure to use one port connection for Status3, Status4,
and Status5. Operation using two port connections for Status4 is not guaranteed.
[Legacy Status for Port 9100] (USB+LAN Model Only)
Set whether to change the return status format of Port3 to legacy status.
Does not appear if you have selected [NONE] in the [Flow Control] menu.
In legacy status, the return status format of Port3 becomes as follows:
Status3
Mode
Data format
Normal
([Legacy
Status for
Port 9100]
is disabled)
Legacy
status
([Legacy
Status for
Port 9100]
is enabled)
Status4
Mode
Data format
Normal
([Legacy
Status for
Port 9100]
is disabled)
Legacy
status
([Legacy
Status for
Port 9100]
is enabled)
244
[Network]