SATO FX3-LX Operator's Manual page 105

Hide thumbs Also See for FX3-LX:

Table of Contents

1. Lift the cradle kit bottom cover (1) while holding the tabs pressed toward center,

then remove it.

2. Take the cable rewinder (2) from the cradle kit.

3. Fix the ferrite core (3) of the AC adapter and wind the AC adapter cord around the

cable rewinder.

Wind the cord in the direction of the engraved arrows on the cable rewinder and wind it firmly,

leaving no space between cord lines.

Place the AC adapter facing its SATO logo (4) upward.