Table of Contents
Advertisement
[Port2] (USB+LAN Model Only)
Set the port number of Port2.
For the two-port connection of Status4, this port is used for returning the printer status.
The setting range is from 1 to 65535.
•
Each port (1, 2 and 3) must be set to different values.
•
This setting is disabled when AEP mode is enabled.
[Port3] (USB+LAN Model Only)
Set the port number of Port3.
For the one-port connection of Status3/Status4/Status5, this port is used for both receiving print data
and returning the printer status.
The setting range is from 1 to 65535.
•
Each port (1, 2 and 3) must be set to different values.
•
You can change the return status format of Port3 to legacy status by enabling [Legacy
Status for Port 9100].
[Flow Control] (USB+LAN Model Only)
Set the communication protocol.
The options are as follows:
•
[STATUS4]
•
[STATUS4 ENQ]
•
[STATUS3]
•
[STATUS5]
•
[NONE]
[TCP Connection Queue] (USB+LAN Model Only)
Set whether to allow queuing for connection when multiple hosts or applications are sending
connection requests to the printer.
While connecting with one host or application, the printer can receive connection requests from
other hosts or applications. The subsequent connection requests are put on hold, and processed
in order of reception after the first connection is closed.
While connecting with one host or application, the printer cannot receive connection requests from
other hosts or applications.
243
Advertisement
Table of Contents
