SATO FX3-LX Operator's Manual page 46

Hide thumbs Also See for FX3-LX:

Table of Contents

USB Memory Status

Print Job Status

The periodic notification in the On-Demand mode of SOS as set previously has

arrived. Scan the QR code and send the information to the SOS cloud.

IP address could not be acquired. Or a communication error has occurred.

USB memory is connected.

Writing data from the USB memory stick.

Waiting for media removal. Remove the media.

Command error detected. Check the print data.

Receive buffer is nearly full. Wait until the printer starts printing the previously sent

data, and then send the next data.