SATO FX3-LX Operator's Manual page 245

Hide thumbs Also See for FX3-LX:

Table of Contents

is disabled)

[BCC] (USB+LAN Model Only)

Enable or disable the BCC check function.

Appears only if you have selected [STATUS5] in the [Flow Control] menu.

[Delay Reply ENQ] (USB+LAN Model Only)

Set the period to delay status reply to status request ENQ.

Available only if you have selected [STATUS3], [STATUS4 ENQ], [STATUS5], or [NONE] in the [Flow

Control] menu.

The setting range is from 0 to 9999 ms.

Normally, keep this setting at the initial value.

[Status4 Cyclic Response] (USB+LAN Model Only)

Set the interval for the cyclic status response.

Available only if you have selected [STATUS4] in the [Flow Control] menu.

The setting range is from 100 to 999 ms.

[Proxy (LAN)] (USB+LAN Model Only)

Set the proxy for the LAN.

The setting items are as follows:

[Enabled] (USB+LAN Model Only)

Enable or disable use of proxy.

To enable the proxy, [Server] should be set and [Exclude] must contain at least

127.0.0.1 and localhost.