SATO FX3-LX Operator's Manual page 259

Hide thumbs Also See for FX3-LX:

Table of Contents

Shows the scan screen of a normal QR code.

Prints with the scan screen for the QR code. Tap [PRINT] to print the QR code.

To print the QR code, use media of more than 40 mm (1.57") in length and more than 40 mm

(1.57") in width (not including the liner).

[QR code offset] (SOS users only)

Specify the offset position of the QR code.

Appears only if you have selected [On-Demand] in the [SOS Mode] menu.

Available only if you have selected [Print] in the [Update Screen] menu.

The options are as follows:

Specify the offset position of the QR code in the vertical direction.

Set the correction value from the standard printing position as "-" for the direction of the paper

feed and "+" for the direction opposite to the paper feed.

The setting range is from -792 to +792 dots.

(1) Feed direction