SATO FX3-LX Operator's Manual page 265

To use SBPL as a printer command, set the following items:
[Show Error]
Enable or disable the command error indication when incorrect command or parameter is detected in
the print data.
Enable the command error indication. The command error is shown and the print operation is
paused when incorrect command or parameter is detected in the print data.
Disable the command error indication.
[Standard Code]
Set the protocol code.
Use a standard code.
Use a non-standard code.
• A message prompting you to restart the printer will appear on the Home screen if you
have made any changes. In such a case, reboot the printer to apply the settings. When
[AUTO] is selected in the [Protocol] menu while the setting is disabled, it is changed to
be enabled.
[Orientation]
Select the layout for printing the label.
Portrait
Use a portrait layout. (No rotation)
Landscape
Use a landscape layout. (90-degree rotation)
Inv. Portrait
Use an inverse portrait layout. (180-degree rotation)
Inv. Landscape
Use an inverse landscape layout. (270-degree rotation)
[Font Settings]
Set the font.
The setting items are as follows:
265