Table of Contents
Advertisement
[Enable]
Enable or disable the functions for Agent.
[Read-Only]
Set the read-only function.
The setting items are as follows:
[SNMP Version]
Set the SNMP version.
The options are as follows:
•
[1|2c|3]
•
[1|2c]
•
[3]
•
[Disabled]
[Community]
Set the read-only community name.
Appears only if you have selected [1|2c|3] or [1|2c] in the [SNMP Version] menu.
You can enter 1 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: public
[User]
Set the read-only user name.
Appears only if you have selected [1|2c|3] or [3] in the [SNMP Version] menu.
You can enter 1 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: rouser
[User Security]
Set the read-only security level.
Appears only if you have selected [1|2c|3] or [3] in the [SNMP Version] menu.
The options are as follows:
•
[None]
•
[Authentication]
•
[Privacy]
[Authentication Protocol]
Set the authentication protocol.
Appears only if you have selected [Authentication] or [Privacy] in the [User Security] menu.
The options are as follows:
•
[MD5]
•
[SHA]
248
[Network]
Advertisement
Table of Contents
