Table of Contents
Advertisement
5. Connect the DC outlet plug (6) to the DC input jack (7) of the cradle kit.
6. Insert the cover and connect the power cord.
a. Insert the cover removed in step 1 (
b. Make sure that the cover is closed properly. Then, connect the power cord to the cradle kit with
the AC outlet plug (8) and to the wall outlet with the power plug (9).
•
The shape of the power plug varies depending on the region in which it was
purchased.
•
If the cord is caught between the cover and the main unit and the cover cannot be
closed properly, perform the processes again from step 3.
Mounting the Printer on the Cradle Kit
1. Remove the terminal protection seal (1) on the bottom of the printer.
You can now see the charging terminal (2).
) and push the tabs downward to secure it in place (
107
).
Advertisement
Table of Contents
