IFM Electronic Ecomat Mobile Series System Manual page 276

Annex
File name
ifm_*_Vxxyyzz.LIB
ifm_CRnnnn_Vxxyyzz.LIB
ifm_CRnnnn_*_Vxxyyzz.LIB
Legend:
* any signs
CRnnnn article number of the controller / monitor
V* CoDeSys
Vxx version number of the ifm software
yy release number of the ifm software
zz patch number of the ifm software
¹) valid for CRnn32 target version up to V01, all other devices up to V04
²) valid for CRnn32 target version from V02 onwards, all other devices from V05 onwards:
*) memory location of the files:
System drive (C: / D:) \ program folder\ ifm electronic
NOTE:
The software versions suitable for the selected target must always be used:
•
of the operating system (CRnnnn_Vxxyyyzz.H86),
•
of the PLC configuration (CRnnnn_Vxx.CFG),
•
of the device library (CRnnnn_Vxxyyyzz.LIB),
• and the further files (→ chapter Overview of the files and libraries used, → page 275)
CRnnnn device article number
Vxx: 00...99 target version number
yy: 00...99 release number
zz: 00...99 patch number
The basic file name (e.g. "CR0032") and the software version number "xx" (e.g. "02") must always have
the same value! Otherwise the controller goes to the STOP mode.
The values for "yy" (release number) and "zz" (patch number) do not have to match.
Also note: the following files must also be loaded:
•
The for the project required internal libraries (designed in IEC1131),
•
the configuration files (*.CFG)
•
and the target files (*.TRG).
276
ifm System Manual ecomatmobile
Description and memory location *)
General libraries
per device several files are possible
...\CoDeSys V*\Targets\ifm\Library
Device-specific library
per device only 1 device-specific file
inlcudes: functions of this device
...\CoDeSys V*\Targets\ifm\Library\ifm_CRnnnn
Device-specific libraries
per device several files are possible
→ following tables
...\CoDeSys V*\Targets\ifm\Library\ifm_CRnnnn
®
version
SmartController (CR2500) V05
Overview of the files and libraries used