IFM Electronic Ecomat Mobile Series System Manual page 24

Configurations
► Highlight the elements which contain only the requested function, in this case e.g.:
NOTE: In other cases libraries and/or visualisations might be required.
► Confirm the selection with [OK].
> In our example project the elements selected in the demo project have been added:
POUs:
► Insert the program [CR2012] in the main program [PLC_PRG] e.g.:
► The comments of the POUs and global variables usually contain information on how the individual
elements have to be configured, included or excluded. This information has to be followed.
► Adapt input and output variables as well as parameters and possible visualisations to your own
conditions.
► [Project] > [Save] and
[Project] > [Rebuild all].
24
ifm System Manual ecomatmobile
Resources:
SmartController (CR2500) V05
Set up programming system