IFM Electronic Ecomat Mobile Series System Manual page 109

CAN in the ecomatmobile controller
► Please note the particularities when using network variables for the corresponding device types.
→ Chapter Particularities for network variables (→ page 112)
Settings in the global variable lists
► Create a new global variable list. In this list the variables to be exchanged with other controllers
are defined.
► Open the dialogue with the menu point [Object Properties].
> The window [Properties] appears:
If you want to define the network properties:
► Click the button [Add network].
If you have configured several network connections, you can also configure here several
connections per variable list.
ifm System Manual ecomatmobile SmartController (CR2500) V05
ifm CANopen library
109