IFM Electronic Ecomat Mobile Series System Manual page 214

More functions in the ecomatmobile controller
Parameters of the function inputs
Name
ENABLE
INIT
CHANNEL
MODE_UP_DOWN
LOAD
PV
NOTE
After setting the parameter ENABLE the counter counts as from the indicated start value.
The counter does NOT continue from the value which was valid at the last deactivation of ENABLE.
Parameters of the function outputs
Name
CV
214
ifm System Manual ecomatmobile
Data type Description
BOOL TRUE: function is executed, starting from the start value.
FALSE: function is not executed.
BOOL TRUE (only 1 cycle):
FALSE: during cyclical processing of the program.
BYTE number of the input (0...3).
BOOL TRUE: counter counts downwards.
FALSE: counter counts upwards.
BOOL TRUE: start value PV being loaded.
FALSE: start value "0" being loaded.
WORD Start value (preset value).
Data type Description
WORD output value of the counter.
SmartController (CR2500) V05
Counter functions for frequency and period measurement
function initialised.