IFM Electronic Ecomat Mobile Series System Manual page 26

Configurations
Demo program
CR2500Demo_CR2031_xx.pro
CR2500Demo_CR2032_xx.pro
CR2500Demo_CR2033_xx.pro
CR2500Demo_CR2101_xx.pro
CR2500Demo_CR2102_xx.pro
CR2500Demo_CR2511_xx.pro
CR2500Demo_CR2512_xx.pro
CR2500Demo_CR2513_xx.pro
CR2500Demo_Interrupt_xx.pro
CR2500Demo_Operating_hours_xx.pro
CR2500Demo_PWM_xx.pro
CR2500Demo_RS232_xx.pro
StartersetDemo.pro
StartersetDemo2.pro
StartersetDemo2_fertig.pro
_xx = indication of the demo version
26
ifm System Manual ecomatmobile SmartController (CR2500) V05
Function
I/O compact module CR2031 as slave of a Controller
(CANopen master),
Current measurement on the PWM outputs
I/O compact module CR2032 as slave of a Controller
(CANopen master),
4 x digital input,
4 x digital input analogue evaluation,
4 x digital output,
4 x PWM output.
I/O compact module CR2033 as slave of a Controller
(CANopen master),
4 x digital input,
4 x digital input analogue evaluation,
4 x digital output,
Inclination sensor CR2101 as slave of a Controller
(CANopen master).
Inclination sensor CR2102 as slave of a Controller
(CANopen master).
I/O smart module CR2511 as slave of a Controller
(CANopen master),
8 x PWM output current-controlled.
I/O smart module CR2512 as slave of a Controller
(CANopen master),
8 x PWM output.
Display of the current current for each channel pair.
I/O smart module CR2513 as slave of a Controller
(CANopen master),
4 x digital input,
4 x digital output,
4 x analogue input 0...10 V.
Example with function SET_INTERRUPT_XMS
(→ page 232).
Example of an operating hours counter with
interface to a PDM.
Converts a potentiometer value on an input into a
normed value on an output with the following POUs:
- Function INPUT_VOLTAGE (→ page 250),
- Function NORM (→ page 253),
- Function PWM100 (→ page 167).
Example for the reception of data on the serial
interface by means of the Windows hyper terminal.
Various e-learning exercises with the starter set
EC2074.
Set up programming system