Table 2-2. Lcu/Lsm Operator Panel - StorageTek 4410 Hardware Operator's Manual

LCU/LSM Operator Panel

Table 2-2. LCU/LSM Operator Panel

Figure 2-2
Label
Item
1 (on older units)
l/O
EPO
2
(Mise hors
EPO
tension en cas
d'urgence)
2-6
Type
Rocker switch/
Indicator (on older
units)
Push-button switch
only (on newer units)
Momentary switch
Commutateur à action
temporaire
Eleventh Edition
Function
Switch: Set the switch to "|" to
turn on DC power and start wake
up procedures. Set it to "0" to turn
off DC power to the LSM after all
in-process commands are
completed.
Indicator: On when DC power is
applied to the LSM.
Emergency power off.
Press this switch to immediately
remove all power from the LCU
and LSM and end all activity in
progress within the LSM.
Use this switch only in an
emergency; the
EPO
can be reset only by a service
representative.
Another switch is inside the
EPO
LSM.
Mise hors tension en cas d'urgence.
Appuyer sur ce commutateur à
action temporaire pour couper
immédiatement le courant dans le
LCU et LSM et interrompre toute
activité en cours dans le LSM.
N'utiliser ce commutateur
qu'en cas d'urgence; seul un
CSE peut rétablir le
commutateur EPO.
Il existe un autre commutateur
EPO dans le LSM.
switch
9206