Table 2-7. 4Xxx Transport Condition Messages - StorageTek 4410 Hardware Operator's Manual

Table 2-7. 4xxx Transport Condition Messages

Message
CHK XXXX
*CLEAN*
*CLEANING*
CLOSE DOOR
DOWNLOAD n
E.O.T.
*ERASING*
FUNCTIONAL
LOADING
LOCATING
NT READY F
NT READY U
P.E.O.T.
READY
READY F
READY U
REWINDING
RWD *CLEAN
*SELFTEST*
StorageTek
TEST DONE
TESTING n
UNLOADING
-WTM FAIL-
*
9206
Description
Transport detected fault symptom code 'XXXX'.
Clean the transport with a cleaning cartridge.
Cleaning cartridge is loaded and running.
Operator must close the door.
Functional code must be downloaded to transport (n is the
transport number, 0, 1, 2, or 3).
Logical end of taped has been reached.
Data security erase is being performed.
Transport is initializing functional code download from
the CU.
Cartridge is being loaded.
Transport is searching for a sector.
Transport is not ready and the cartridge is file protected.
Transport is not ready and the cartridge is not file protected.
Transport is at the physical end of tape.
Transport is ready.
Transport is ready and the cartridge is file protected.
Transport is ready and the cartridge is not file protected.
Transport is rewinding the cartridge tape.
Request for a cleaning cartridge occurs while another
cartridge is rewinding.
Transport is running boot PROM diagnostics.
IPL is complete.
Transport has successfully completed servo diagnostics and
is waiting for functional code to be downloaded from the CU.
Transport is running servo diagnostics on transport 'n'.
Transport is unloading.
Request to write a tape mark failed (switch is on the back of
the CD). Place a service call.
Transport is unloaded.
Eleventh Edition
Cartridge Drive Operator Panel
2-25