Placing The Lsm In Automatic Mode; Entering Cartridges Removed During Manual Mode - StorageTek 4410 Hardware Operator's Manual

Returning to Automatic Mode

Placing the LSM in Automatic Mode

Type the appropriate command at the console to place the LSM online to all hosts. Refer
to the appropriate software manual for the command syntax and console messages.

Entering Cartridges Removed During Manual Mode

To return the cartridges to the LSM that you removed while the LSM was in manual
mode, do one of the following:
• After you place the LSM online to all hosts, enter the cartridges through the CAP, as
described in
page 3-3
page
• Before you leave the LSM, place all cartridges into the storage cells of one panel, and
audit that panel.
• Before you leave the LSM, place the cartridges in empty cells at random on several
different panels and audit the entire LSM (or at least all panels with added cartridges).
3-60
"Entering Cartridges through Standard CAP—Manual Mode" on
or "Entering Cartridges through Enhanced CAP—Manual Mode" on
3-7.
Eleventh Edition 9206