Figure 3-3. Enhanced Cartridge Access Port-Closed - StorageTek 4410 Hardware Operator's Manual

LSM Automatic Mode
2. Open the CAP door by pulling down on the paddle handle CAP latch
Figure 3-3. Enhanced Cartridge Access Port—Closed
DISPLAY
DISPLAY
SWITCH
VIEW
WINDOW
PCAP
LATCH
LSM
ACCESS
DOOR
LATCH
LAD
LATCH
3. Place the cartridges in the magazine cells
cartridges so that the customer label is facing up and the VOLSER label is facing
you.
Note: You may put cartridges into the magazines while the magazines are in the
3-8
CAP.
or
You may remove the magazines from the CAP, insert cartridges into the
magazines, then replace the cartridge-filled magazines into the CAP.
Eleventh Edition
CAP
LATCHES
(Figure 3-4 on page 3-9). Insert the
(Figure 3-3).
C29396
9206