Figure A-5. Applying Labels To 3480-Type Cartridges - StorageTek 4410 Hardware Operator's Manual

Notes:
1. Make sure that labels are not placed elsewhere on the cartridge surface.
2. Make sure that the edges of the labels do not curl up; curling causes the cartridge to
stick in the drive loader.
3. Use labels that do not leave a residue when they are removed.
4. Make sure that the label contains a volume serial ID (VOLSER).

Figure A-5. Applying Labels to 3480-type Cartridges

VOLSER
LABEL
9206
CUSTOMER
LABEL
Eleventh Edition
Preparing Cartridges
C29446
A-9