LSM Manual Mode
6. Verify that the transport Ready LED is lit (or that the T9x40 display shows Ready);
then insert the cartridge as shown in:
•
•
Note: If the 4xxx transport does not load the cartridge, verify that the elevator is
Figure 3-29. Inserting a T9x40 Cartridge
3-54
Figure 3-29
for T9x40 drives
Figure 3-30 on page 3-55
down and press the
REWIND
Eleventh Edition
for 4xxx transports
switch to activate the transport.
C29843
9206