Dismounting A Cartridge; For 4Xxx Transports - StorageTek 4410 Hardware Operator's Manual

LSM Manual Mode

Dismounting a Cartridge

To dismount a cartridge:
WARNING:
Do not enter the LSM until you are familiar with the procedure described
in "Entering the LSM" on page
ATTENTION:
Ne pas entrer dans le LSM avant d'être familiarisé avec les procédures
décrites dans le paragraphe «
WARNUNG:
Das LSM erst betreten, wenn das unter
beschriebene Verfahren bekannt ist.
AVVERTENZA:
Non entrare nell'LSM se non si conosce bene la procedura descritta
nella sezione

For 4xxx transports:

1. Be sure the transport is not in use by the system.
2. Enter the LSM and go to the desired transport.
3. Press the
This places the
4. Press the
This causes the transport to rewind and unload the cartridge.
5. Remove the cartridge from the transport and the LSM.
6. Store the cartridge outside the LSM.
7. Place the
The Ready LED comes on when this action occurs. The transport is ready for
automated operations.
3-56
3-20.
Entrer Dans Le LSM
"Ingresso nell'LSM".
switch.
READY
switch in the
Ready
switch.
UNLOAD
switch in the
READY READY
Eleventh Edition
».
"Betreten des LSM"
position.
NOT READY
position.
9206