Locating A Cartridge In The Lsm; Cartridge Location In The Console Message; Cartridge Location On Message Display Panel - StorageTek 4410 Hardware Operator's Manual

Locating a Cartridge in the LSM

The cartridge volume serial ID (VOLSER) and cell location are provided in a console
message and on the transport/drive display panel.

Cartridge Location in the Console Message

The console message provides the VOLSER and cell location of the cartridge, and the
address of the transport/drive allocated for the mount. Before you enter the LSM, write
down the VOLSER, cell location, and transport/drive address that is given in the console
message.
Figure 3-22 on page 3-46
columns are numbered. The panel type associated with a particular panel applies only to
this example. Panels 1 through 9 may be configured differently in your environment.

Cartridge Location on Message Display Panel

Inside a manual mode LSM, the transport/drive display panel switches back and forth
between the VOLSER and cell location of the requested cartridge. The VOLSER appears
as seven characters: the six-character volume serial number prefixed with an M, indicating
the transport is awaiting the mount.
The cell location appears in the following format:
where:
ll calls out an LSM
pp calls out an LSM panel
rr calls out a row in the panel
cc calls out a column in the row
An example of the location displayed is:
In this example, the cartridge is located in LSM 01, panel 07, row 11, column 15.
9206
through Figure 3-27 on page 3-51
l l p
0 1 0
Eleventh Edition
show how panels, rows, and
p r r
7 1 1
LSM Manual Mode
c c
1 5
3-45