Leaving The Lsm - StorageTek 4410 Hardware Operator's Manual

Leaving the LSM

Before you leave the LSM, make sure that no tools or foreign objects are left, and no
cartridges are outside the cartridge cells. Make sure that nothing is lying on the top
portion (the ledge) of the bottom inner wall. Then:
1. Step outside the LSM.
WARNING:
PHYSICAL INJURY. Before you close the LSM access door, look inside
the LSM and ask in a loud voice to determine whether anyone is inside
the LSM.
ATTENTION:
Avant de fermer la porte d'accès du LSM, regarder à l'intérieur puis
demander à voix haute si quelqu'un s'y trouve.
WARNUNG:
Vor dem Schließen der Eingangstür zum LSM im Innern nachsehen und
laut fragen, ob sich noch jemand darin aufhält.
AVVERTENZA:
Prima di chiudere la porta d'accesso, guardare all'interno dell'LSM e
chiedere ad alta voce se c'è qualcuno.
2. If necessary, close the CAP door.
3. Remove all cartridges from the CAP and store them outside the LSM.
4. Open the LAD, insert the key in the lock, and turn the key to the unlocked position.
CAUTION:
EQUIPMENT/MEDIA DAMAGE. Do not slam the door. You could damage
the door, or cause cartridges to fall onto the floor. The robot cannot
recover cartridges that fall onto the floor.
5. Pull the latch handle and gently close the door, pushing on both the top and the
bottom of the door until it clicks shut.
6. Turn the key to the locked position.
7. Remove the key from the lock and close the LAD. The LSM automatically performs
a quick initialization procedure.
9206 Eleventh Edition
Returning to Automatic Mode
3-59