Loading a Functional Diskette
The LMU, LCU, or CU you are loading could have a floppy drive or a diskette drive. Use
the appropriate instructions:
•
"Inserting a Floppy Disk into a Drive"
•
"Inserting a Diskette into a Disk Drive" on page 3-71
Inserting a Floppy Disk into a Drive
To insert a functional disk into a floppy drive:
1. Make sure that the lever at the entry slot of the drive is rotated as far as it will go
counterclockwise.
2. Insert the floppy disk into the drive
CAUTION:
DISKETTE/EQUIPMENT DAMAGE: Do not push against the diske if there
is any resistance. Damage might occur to the floppy disk, the drive, or
both.
3. Push the floppy disk in until it is completely in the drive.
4. Rotate the lever one-quarter turn clockwise.
9206
(Figure 3-31 on page
Eleventh Edition
Loading a Functional Diskette
3-70).
3-69