Returning To Automatic Mode; 4Xxx Transports; T9X40 Drives - StorageTek 4410 Hardware Operator's Manual

Returning to Automatic Mode

Returning to Automatic Mode
The following pages describe how to return the LSM to automatic mode.

4xxx Transports

All 4xxx transports must be in a ready condition before you close the LSM access door
and place the LSM in automatic mode.
1. Check the READY indicator above the
every transport.
2. If this indicator is lit, do nothing to the corresponding transport.
3. If this indicator is not lit, press the

T9x40 Drives

To verify that the T9x40 drives are ready and online, press the
operator panel; the display should now show Online.
If the drive displays Offline, press the
• If the drive message indicates Online, the transition to online completed.
• If the Onl Pend message displays, the online state is pending due to completion of
diagnostic tests.
• If other messages appear, consult either the T9840 Tape Drive User's Reference Manual,
PN 95739, or T9940 Tape Drive Operator's Guide, PN 95989.
3-58
switch on the CD operator panel for
READY
switch until indicator turns on.
READY
switch once to place it online.
SELECT
Eleventh Edition
switch on the drive
MENU
9206