Construction - Siemens SITRANS L Compact Operating Instructions

Technical specifications

8.6 Construction

8.6 Construction
Enclosure
•
•
•
Remote panel mount
•
•
Display
Cable
Weight
Use appropriate cable entry seals to maintain applicable Type, IP rating.
1)
Must be installed in a Type 4X, IP65 enclosure.
2)
Belden is a registered trademark of Belden Wire & Cable Company.
3)
106
Wall mount, standard
enclosure
Wall mount, 4 entries
with M20 cable glands in-
cluded
Panel mount
Remote display lid
Blank lid
2)
• 240 mm (9.5 inch) x 175 mm (6.9 inch). Width dimension includes
hinges.
• Type 4X, IP65
1)
• Polycarbonate
• 240 mm (9.5 inch) x 175 mm (6.9 inch). Width dimension includes
hinges.
• Type 4X, IP65
1)
• Polycarbonate
• 278 mm (10.93 inch) x 198 mm (7.8 inch), width dimension in-
cludes flange.
• Type 3, IP54
1)
• Polycarbonate
• 144 mm (5.7") x 144 mm (5.7") x 22 mm (0.87")
• IP65
1)
• Polycarbonate
• Operational up to 5 m from enclosure base
• 241 mm (9.5") x 160 mm (6.3") x 15 mm (0.60")
• Polycarbonate
• Backlit HMI LCD display
• Dimensions: -60 x 40 mm (2.36 x 1.57")
• Resolution: -240 x 160 pixels
• Removable display, operational up to 5 m from enclosure base
• Using a co-axial cable with the device is NOT recommended. If it is
really necessary to use such cable, see Sensor connections
(Page 32) for important wiring notes.
• Sensor, mA output, mA input, Digital input, Sync, TS-3 cables:
cable to be two copper conductors, twisted shielded wire, 0.324 ...
0.823 mm (22 ... 18 AWG), nominal capacitance between adja-
2
cent conductors @ 1 kHz = 62.3 pF/m (19 pF/ft), nominal capaci-
tance between conductor and shield @ 1 kHz = 108.3 pF/m (33
pF/ft) (Belden
8760 is acceptable)
3)
• Insulation rated to 300 Vrms
• Maximum length: 365 m
• Wall mount: 1.22 kg (2.68 lb)
• Panel mount: 1.35 kg (2.97 lb)
• Remote panel mount: 1.73 kg (3.80 lb)
Compact Operating Instructions, 02/2024, A5E52021877-AA
SITRANS LT500 with ultrasonic transducer inputs