Ecu To Fst Connection - Lycoming TEO-540 Series User's Manual And Troubleshooting Manual

Field Service Tool User Manual
TEO-540-C1A Engine Maintenance Manual
Connect the ECU to the laptop where the FST is installed
1. Connect the USB plug end of the iE2 Field Service Tool CAN Interface (ST-530) to the USB
port on the laptop.
2. Connect the CAN Interface plug end of the iE2 Service Cable (ST-528) to the CAN Interface.
3. Connect the RCA plug end of the iE2 Service Cable (ST-528) to the airframe-supplied RCA
jack in the cockpit.
© 2022 Avco Corporation. All Rights Reserved
August 2022

ECU TO FST CONNECTION

Figure 1
Laptop Connected to the ECU
ECU to FST Connection
Page 13