7.2
Advanced settings for ISE
For the inoLab Level 3 pH/ION measuring module.
7.2.1
Units of the ISE display
You can select the units of the measured value:
1
Switch to the Menu mode.
46
2
Use
3
Select the ISE menu item with
4
Select the ISE setup menu item with
5
Confirm the ISE setup menu item with
6
Select the Unit menu item with
7
Confirm the Unit menu item with
8
Select a Unit with
9
Confirm the Unit with
The selected Unit is active (✔).
10
If mg/l was selected:
Continue with step 14.
11
If mol/l was selected:
Select a Ion type with
Continue with step 13.
to select the main Meas menu.
82
.
g
.
82
.
Ion concentration
82
.
82
.
g
.
82
.
g
.
95