End Measurement - wtw inoLab Level 3 Operating Manual

BOD
160
9.2.4

End measurement

The end measurement is carried out after the incubation
period expires.
Note
Normally, you can confirm all windows and settings in the
end measurement by simply pressing [Start]. The settings
and values offered correspond to the values that were
entered in the start measurement.
1 Switch to the Menu mode.
46
2 Use
3 Select the BOD menu item with
4 Confirm the BOD menu item with
5 Select the menu item BOD end meas with
6 Confirm the BOD end meas menu item with
The Select sample window opens.
to select the main Meas menu.
82
.
g
.
82
.
g
.