Setting The Ph Display - wtw inoLab Level 3 Operating Manual

pH
Measured variable,
72
6.1.2

Setting the pH display

pH electrodes are connected to the same connector on the
measuring module.
The selection of the measured variable ISE or pH is made in
the main Meas menu. The active pH or ISE setting is marked
with ✔.
1 Switch to the Menu mode.
pH
2 Use
3 Select the pH menu item with
4 Confirm the pH menu item with
The pH display is active (✔).
5 Terminate the Menu mode with
The pH value appears on the display.
46
to select the main Meas menu.
82
.
g
.
m
.