wtw inoLab Level 3 Operating Manual page 17

Safe operation
Obligations of the
purchaser
If safe operation is no longer possible, the measuring
system must be taken out of service and secured against
inadvertent operation!
Safe operation is no longer possible if the measuring system
(terminal or measuring module):
l
has been damaged in transport
l
has been stored under adverse conditions for a lengthy
period of time
l is visibly damaged
l no longer operates as described in this manual.
If you are in any doubt, please contact the supplier of the
measuring system.
The purchaser of this measuring system must ensure that
the following laws and guidelines are observed when using
dangerous substances:
l EEC directives for protective labor legislation
l National protective labor legislation
l Safety regulations
l Safety datasheets of the chemical manufacturers.
Safety
17