Selecting The Measured Value Display - wtw inoLab Level 3 Operating Manual

D. O. concentration
D. O. saturation
D. O. partial
pressure
2 Immerse the D. O. probe in the test sample.
The measured variable last selected appears on the
display.
8.3.1

Selecting the measured value display

46
1 Press the
concentration appears on the display in mg/l.
46
2 Press the
% appears on the display.
46
3 Press the
pressure in mbar appears on the display.
Dissolved oxygen (D. O.)
key repeatedly until the oxygen
key repeatedly until the saturation in
key repeatedly until the D. O. partial
145