Outputting Data To The Integrated Printer; General Information - wtw inoLab Level 3 Operating Manual

Data output
218
12.2

Outputting data to the integrated printer

12.2.1 General information

The integrated printer is operated via the
f
on/off) and the
The operating status of the printer is indicated by the print
LED on the terminal.
l Green LED: printer ready for operation
l Red LED: printer off or malfunction
To print on the integrated printer, the following conditions
must be fulfilled:
l The integrated printer must be switched on and ready for
operation (print LED lights up green, see section 12.2.2),
l The data output is set to the integrated printer (see
section 12.2.3),
l A manual or automatic print job must have been given
(section 12.2.4),
Note
For troublefree operation of the integrated printer, we
recommend disconnecting any other devices from the
RS232/REC interface.
It is not possible to operate the integrated printer and
external devices (printer, PC, or analog recorder) on the
RS232/REC interface at the same time.
key (manual line feed) on the terminal.
o
key (switched